yagmur

» Fuel and Installation Information

GENERAL INFORMATION TO BE TAKEN INTO CONSIDERATION

The most appropriate way to perform the external surface cleaning is cleaning with warm water and soap, instead of sharp objects and chemical substances.

For boilers operated with liquid fuel, buy extra fuel before the amount in the storage finishes.

Do not open the lids while the flame is burning. Do not leave the lids open.

Do not put any fuels in the bunker other than the one recommended by the manufacturing company. (liquid or other flammable substances) Never remove the bunker sieve.

Pay attention for the fuel to be clean. Wet coal and the bolts, screws, stones etc. will damage the stocker mechanism.

Do not approach when the reducer and helix are operating and don’t throw foreign objects (e.g. stone)

In agitated storage tanks, the reducer shouldn’t be operated before the flammable substances that are put on the coal (wood, kindling, oily cloth) start to glow, otherwise the ash falls inside the helix section and causes clogging.

The fire should be kept on top of the burning chamber that we name as basket. The fire shouldn’t burn inside the basket, otherwise it will cause damage in the boiler by melting the cast material and helix.

In YTPH type boilers, the coal level should be at least 20cm above the base, otherwise the risk of smoking of bunker may arise.

Do not lose the usage manual, we recommend you to make use of it when needed.

Following the steps stated in the manual will prolong the efficiency and life of your boiler.

Use your boiler in compliance with the instructions given by our authorized service when it was being delivered to you running with correct settings. Do not adjust its settings without informing the service.

In YTKH type boilers, do not put your fuel into the boiler inside the melting materials like sack or plastic bag. It will cause harm to grates and moving parts.

Please buy your fuel before calling the service for the first run.

  

FUEL

Please do not forget that the quality of the fuel you use will affect the boiler efficiency, burning quality, the amount of ash, cleaning time and the amount of the fuel you consume. High calorie coal can cause damage to cast and sheet metal. Do not use powedered, wet or coking coal.

 

INFORMATION ON ASSEMBLY

Actions to be taken before the mounting crew arrives.

On the location agreed upon with Yağmur Teknik staff:

a) Concere should be laid in the given dimensions
b) Establishing three-phase (380 V) electricity

Also it is necessary to buy an adequate amount of fuel for the first run.

Appropriate Installation

The most appropriate way to perform the external surface cleaning is cleaning with warm water and soap, instead of sharp objects and chemical substances.

For boilers operated with liquid fuel, buy extra fuel before the amount in the storage finishes.

Do not open the lids while the flame is burning. Do not leave the lids open.

Do not put any fuels in the bunker other than the one recommended by the manufacturing company. (liquid or other flammable substances) Never remove the bunker sieve.

Pay attention for the fuel to be clean. Wet coal and the bolts, screws, stones etc. will damage the stocker mechanism.

Do not approach when the reducer and helix are operating and don’t throw foreign objects (e.g. stone)

In agitated storage tanks, the reducer shouldn’t be operated before the flammable substances that are put on the coal (wood, kindling, oily cloth) start to glow, otherwise the ash falls inside the helix section and causes clogging.

The fire should be kept on top of the burning chamber that we name as basket. The fire shouldn’t burn inside the basket, otherwise it will cause damage in the boiler by melting the cast material and helix.

In YTPH type boilers, the coal level should be at least 20cm above the base, otherwise the risk of smoking of bunker may arise.

Do not lose the usage manual, we recommend you to make use of it when needed.

Following the steps stated in the manual will prolong the efficiency and life of your boiler.

Use your boiler in compliance with the instructions given by our authorized service when it was being delivered to you running with correct settings. Do not adjust its settings without informing the service.

In YTKH type boilers, do not put your fuel into the boiler inside the melting materials like sack or plastic bag. It will cause harm to grates and moving parts.

Please buy your fuel before calling the service for the first run.

 

 

» Return to top